Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can you help me in use of the m/w/o

Status
Not open for further replies.
S

sunwanderer

Newbie level 4
Newbie level 4
Joined
Nov 30, 2003
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
in the east
Activity points
34
I don't know how to deal with the bends of hairpin filter of microstrip ,and optimize EM structure by the software of microwave office
Thanks.
 

Hi,

MWO doesn't allow EM structure optimisation (yet). You could try to use X-models for your discontinuities in the linear simulation (they are based on EM simulations and are the most accurate). Than you can tune and optimize them. You have to fill the EM interpolation tables previously for your substrate material.
Or you can simulate your filter structure in Sonnet, then you can define parameters and optimise the dimentions of your structure.

regards, Al
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top