Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

can XC9572 use Vcc 5V?? / TTL or CMOS

Status
Not open for further replies.

J_expoler2

Member level 4
Member level 4
Joined
May 10, 2003
Messages
77
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
619
can XC9572 use Vcc 5V

can XC9572 use Vcc 5V ?? if it can't using 5v it can interface TTL or CMOS
 

Hi

Of course it can. See the datasheet

**broken link removed**
 

As I remember XC95--XL family with 3.3V VCC is 5V TTL (not CMOS) in/out tolerant.
 

XC95xxXL is for 3.3v VCC and XC95xx is for 5v VCC.
 

xc95xx are 5 volt VCC.
Xc95xxXL are 3.3V but 5 volt tolerant.
CPLD are Cmos and can't drive a 5 volt device but can be used as slave.
bye
 

I think XL can drive 5V TTL
 

xc95xx (9572)are 5 volt VCC.
Xc95xxXL (95288xl)are 3.3V but 5 volt tolerant
 

YES!IT IS!
 

Re: can XC9572 use Vcc 5V

I thing that XC9572XL can drive 5V input device powered at 5V
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top