Can PIC16LF1829 can run from CR2032 cell?

[jayanth.devarayanadurga]

I can't use larger battery because it is for a remote control module. The remote control will have one PIC and nRF24L03 and battery on the board. Remote should be handheld device. I can't put a big battery into it. I can put battery simular to that in mobile phones. Can I get 4.5 or 6V 1200 mAh batteries similar to mobile phone batteries?

 

[tpetar]

Can I get 4.5 or 6V 1200 mAh batteries similar to mobile phone batteries?

Li-Po have around 4V when battery is full, if you want to have higher voltage then nominal, then you can use voltage booster to stepup voltage to 5V or any other voltage what you need.

I made small Li-Po/Li-Ion voltage booster with MC1640 to stepup voltage to very stable 5V with 96% efficiency and current of 100mA. Its very miniature and need very small space on board with minimal number of parts. This can be added to main project circuit as additional few parts to board.

 

[upand_at_them]

Be careful with the voltage, though. That radio module has a maximum supply voltage of 3.6V. You'll need an LDO regulator.