Can I use 22pf ceramic capacitor instead of 0.1uf ceramic cacpacitor?

Status
Not open for further replies.

HerohetoChakma

Junior Member level 3
Joined
Apr 19, 2013
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Chittagong, Bangladesh.
herohetoc.webs.com
Activity points
2,338
Can I use 22pf ceramic capacitor instead of 0.1uf ceramic cacpacitor?? If no then tell me what types of capacitor could i use instead of it. Or can i use 0.1uf electric capacitor instead of ceramic capacitor. i want to use it in 20MHz crystal.
 

Capcitors serve a specific functional purpose in a circuit. It's unlikely, that a 22 pF capacitor can work in place of 100 nF or vice versa. 100 nF capacitors are often used as "firsl-level" bypass capacitor, near to power supply pins. 22 pF would be almost effectless in this place (except for RF circuits), a foil or electrolytic type has probably too high series impedance, but would be better than nothing, though.

Capacitors around crystals are clearly specified in datasheets and essential for operation. You must not change it's value.
 
Reactions: tpetar

    tpetar

    Points: 2
    Helpful Answer Positive Rating
Can I use 22pf ceramic capacitor instead of 0.1uf ceramic cacpacitor?? If no then tell me what types of capacitor could i use instead of it. Or can i use 0.1uf electric capacitor instead of ceramic capacitor. i want to use it in 20MHz crystal.

Read section for oscillators, and others chapters and sections if you want, its useful :

https://www.mikroe.com/chapters/view/17/
 
Reactions: FvM

    FvM

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…