Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CAN controller and transceiver for AVR appication

Status
Not open for further replies.

Niver

Junior Member level 3
Junior Member level 3
Joined
Oct 11, 2001
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
224
can bus avr

Hi all,

I'm looking for projects with CAN bus interface for any chip of the Atmel AVR family. Projects related with these chips can help me.

CAN Controllers.
-------------------
Philips SJA1000 or Microchip MCP2510

CAN Transceivers.
---------------------
Philips PCA82C250 or Microchip MCP2551

I'd like to build a CANDIP like project

..and I'm looking for something similar...but open source. It will be very helpful for me schematics and sorce code.

thanx in advance!!
 
Last edited by a moderator:

avr can bus

Well, i hate to post this, but its a me too.....
In my project i have a risk processing gps, 2 serial, 1 rf link and 1 tdma link
Also has a AC97 for all audio stuff + webcam.
I placed a xilinx fpga so plenty of space for the CAN stack in hw.
But trouble is Documentation.
Is this CAN compatible for all vendors or each is different?
Any help realy apreciated...
 

avr can controller

Hi padspcb,

I think you want to implement the CANbus specifications in the FPGA, isn't it?

This link is a a good source of info about CAN and specifications,
**broken link removed**
I hope it helps you.

For higher layers protocols, it seems that CANopen is the european standar.

Anyone can help us?, Thanx in advance!
 

avr transceiver

Hi,

(Nice avatar PadsPCB!)

If anyone knows a nice project with AVR and CAN, please let me know.
greetz, venz.
 

philips can controller + avr interface

Hello,

please take a look at:

**broken link removed**

cu
Nick
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top