Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can CAN 2.0B and J1939 coexist in the same CAN Network?

Status
Not open for further replies.
J

jani12

Advanced Member level 4
Full Member level 1
Joined
Oct 30, 2014
Messages
108
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,536
Please consider CAN communication network in a heavy vehicle:
  • Steering Electronic Control Unit (ECU) has CAN 2.0B. It doesn't have J1939 stack.
  • All other ECUs in this network are implemented with J1939 stack.
Can CAN 2.0B coexist with J1939?

What code changes are needed in steering ECU and other ECUs in order to communicate successfully on the same CAN bus?

How will the ECUs claim static source address since steering ECU doesn't have J1939 stack?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top