can anyone help me in designing oscillators

Status
Not open for further replies.
R

Reymel S. Arizala

Newbie level 5
Joined
Jul 21, 2013
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
46
we need to design a wein bridge oscillator, with an output frequency of 800khz and Vp 0f 10V.. can anyone suggest for the best op amp to use in the design
 

It's spelt "Wien Bridge". If you search for that you should find some designs.
 

Reymel S. Arizala said:
we need to design a wein bridge oscillator, with an output frequency of 800khz and Vp 0f 10V.. can anyone suggest for the best op amp to use in the design
Click to expand...

Pretty high requirements (bandwidth and slew rate).
Most probably, a current-feedback amplifier (CFA) with a bandwidth of several 10th of MHz will be necessary.
 





sir can you suggest modification in the design..

- - - Updated - - -





sir can you suggest modification in the design..

- - - Updated - - -

sorry for miss spell
 

Why modification?
Which kind of modification?
It looks good, for my opinion.
 

in my computation, the value is not like that, i adjusted the values of the resistors..is it okay?
 

Reymel S. Arizala said:
in my computation, the value is not like that, i adjusted the values of the resistors..is it okay?
Click to expand...

For current-feedback amplifiers, the feedback resistor Rf determines stability and optimum performance.
For a gain of +3 the optimum value is approx. Rf=500...1000 ohms (see data sheet).
Thus, I recommend to change all resistors in the feedback path to corresponding lower values.
It is to be expected that, in this case, theoretical and practical values will come much closer.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…