can 18F452 run with 40Mhz XTL using 5V vcc???

Status
Not open for further replies.
D

drbizzarow

Advanced Member level 1
Joined
May 24, 2006
Messages
414
Helped
25
Reputation
50
Reaction score
15
Trophy points
1,298
Visit site
Activity points
3,662
hii

i have a very simple question.
can 18F452 run with 40Mhz Xtl using 5V vcc??? or only 3V volt version can run with 40Mhz Xtl???
 

drbizzarow said:
hii

i have a very simple question.
can 18F452 run with 40Mhz Xtl using 5V vcc??? or only 3V volt version can run with 40Mhz Xtl???
Click to expand...

Hi,

If you see the Datasheet Section 22 figs 22-1 and 22-2 it shows that both the standard and LF 452 will run 40mhz but must have a VDD of 4.2v+ and above.
 

thx for quick reply.....
yah !! i have saw it already but need confirmation. thx again.
 

can 18F452 run with 40Mhz Xtl using 5V vcc??? or only 3V volt version can run with 40Mhz Xtl???
Click to expand...
Neither version will work with 40MHz crystal.

If by "Xtl" you mean 2 pin crystal, then the datasheet shows maximum crystal frequency as 25MHz (HS mode).

You can use something like 4 pin canned crystal oscillator of 40MHz in EC or ECIO mode.

... or you can use a 10MHz 2 pin crystal in HS+PLL mode to give the full 40MHz clock.

A 40MHz 2 pin crystal is of no use with PIC18F452.
 

thx hexreader,

can you share me some detail documentation, how i can use 18f452 or 18f4520 with 40Mhz crystal.
actualy i am working on RGB led display i need speed.
thx in advance.
 

i have already start googleing it and i am on it....
thx again any way .
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…