Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

calibre and assura extraction

Status
Not open for further replies.
deepak242003

deepak242003

Full Member level 5
Full Member level 5
Joined
Dec 24, 2008
Messages
310
Helped
43
Reputation
86
Reaction score
18
Trophy points
1,298
Location
Banglore
Activity points
2,816
For the extractoin of same circuit, I am getting different extraction parasitics for calibre and assura.....

any idea????

below is the extraction for assura...

rl1482 ( dvss12\#15991 dvss12\#15386 ) resistor r=999999995904.0000

rl1492 ( dvss12\#15305 dvss12\#16867 ) resistor r=999999995904.0000
.????? :|
 

Assura is giving large parasitic resistance values. Donno y but the results are really bad with RC extraction of assura. Try C extraction of the same. I think it'll work.
Calibre extraction is good and i think it is accurate.
 

kranthi_m said:
Assura is giving large parasitic resistance values. Donno y but the results are really bad with RC extraction of assura. Try C extraction of the same. I think it'll work.
Calibre extraction is good and i think it is accurate.
Click to expand...

yes ofcourse it will work, bcause assura will not calculate parasitic resistance in C extraction.. ...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top