Cadence post-sim question

Status
Not open for further replies.
D

dragonwell

Junior Member level 3
Joined
Mar 31, 2004
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
299
Hi,

I found that i can perform post-simulation by setting up the config view or just simply insert the extracted view to the simulation envirment.
Am I doing the same thing? What is the different?

Dragonwell
 

As long as you choose the same simulator, you are doing the same thing.
 

config view allows you to choose between the different views to use for simulations like spetre, schematic, verilog .. or even extracted. So its the same as long as the view to use for sim is extracted. However I am not sure with wrt to mixed signal simulations (i.e for the Interface elements)
 

not use cadence
use starsim star_rx so on and so force
to do the post-sim
 

It is very convinient by insert the extracted view for postsimulation.
 

dragonwell said:
Hi,

I found that i can perform post-simulation by setting up the config view or just simply insert the extracted view to the simulation envirment.
Am I doing the same thing? What is the different?

Dragonwell
Click to expand...

This may help.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…