Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
If you install over the previous version (base), you do not need the base CD for installation.
If want to install the ISR/QSR on a new directory, then you will need the base CD (IC5.0).
No.
EACH version [5.001, 5.033, etc] needs its Base.
To be more specific:
1. A 5.001 installation can not be upgraded by a 5.033 ISR/QSR
2. A 5.033, if already installed, just needs a 5.033 ISR/QSR [no need for 5.033 Base]. However, if not installed, a 5.033 will first need the 5.033 Base to be installed, and then updated with the latest 5.033 ISR or QSR.
If your company bought the C@dence's software, you would have upgrade servce.
They will give you a set of CD including Base. You'd better use this one, and download the most updated QSR/ISR.
Again - the Cadence rule for same version "X.YZ" is:
You just need latest QSR or ISR or UPDATE for exisiting installation to be updated !
You need Base & latest QSR or ISR or UPDATE for new installation to be updated !
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.