c code for data transfer between gprs modem and remote server

[ravi8820]

How to develop a C code using AT commands for transferring the data between GPRS modem and Remote server by setting up a TCP connection to the webserver.............The GPRS modem is interfaced with an ATMEGA 16A microcontroller...................Please help...............

 

[poornima]

ye i am also facing same problem

 

[sachinkp21587]

first of all bring your GPRS connection up by setting PRIMARY SECONDARY DNS, APN etc. and then use following
AT+CIPSTART=”TCP”,”ip to send to”,”port number to be used”
AT+CIPSEND
> type data to send and press Ctrl Z at end