Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

building transistor as a switch

Status
Not open for further replies.

uvaraj6

Newbie level 4
Newbie level 4
Joined
Aug 17, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bangalore,India
Activity points
1,330
hi friends i want to design a switch using transistor...

can any body help by providing some circuit.. and help me...
 

use a MOSFET (give your control input gate that will allow signal to flow from drain to source(nmos))and be carefull if you are going to drive a relay you will have to put a free wheeling diode....You can refer to any website or books on electronic devices boyelstead or sedhra & smith
 
where exactly do you want to put in your switch? is it a critical component in your circuit?
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top