Build Test Mode in encounter test tool

Status
Not open for further replies.
A

anjugeorge5u

Newbie level 5
Joined
Sep 7, 2011
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,334
Hi,
Please help me solve the problem regarding building a test mode in cadence encounter test tool. I am using the tool for generating ATPG patterns. While building a test mode, a sequence definition file in TBDPatt is needed. How can i generate the pattern. Please help me.
 

Did you do (RTL Compiler) something like this ? :
write_et_atpg controller -library { stdc.v io.v RAM1024x16.v RAM8192x16.v} -directory ./et_dft

and (Encounter Test) this ? :
build_model workdir=./et_dft designsource=ctrl.netlist.v techlib=RAM1024x16.v,RAM8192x16.v,io.v,stdc.v cell=ctrl
 
Thank you for your reply. I am new to this tool and was converting one synopsis script to RTL compiler form in order to use it in ET tool. Thanks a lot.
 

For builiding a test mode, I guess all you need is modedef file, tdr file and pinassign file. It is fine if you are not providing TBDPat file.
 

yes. I tried without TBD patt file. and I am getting the result.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…