ngmedaboard
Member level 3
- Joined
- Feb 7, 2010
- Messages
- 60
- Helped
- 7
- Reputation
- 14
- Reaction score
- 4
- Trophy points
- 1,288
- Location
- United States
- Activity points
- 1,831
Assume a buck converter, switch opened state and in continuous mode.
I know when the switch opens, the diode forward biases completing the circuit and drawing energy out of the inductor.
But in order for that diode to forward bias, the input side of the inductor needs to swing about 0.5V below ground (assuming a Schottky diode).
Is that 0.5V below ground the cause or effect from the diode? In other words A, B or other?
A. The input of the inductor swings low enough causing the diode to forward bias.
or
B. The inductor is just agressively pumping current, it finds the path through the diode, which forward biases the diode thus causing the 0.5V swing below ground.
I know when the switch opens, the diode forward biases completing the circuit and drawing energy out of the inductor.
But in order for that diode to forward bias, the input side of the inductor needs to swing about 0.5V below ground (assuming a Schottky diode).
Is that 0.5V below ground the cause or effect from the diode? In other words A, B or other?
A. The input of the inductor swings low enough causing the diode to forward bias.
or
B. The inductor is just agressively pumping current, it finds the path through the diode, which forward biases the diode thus causing the 0.5V swing below ground.