biff44
Advanced Member level 6
- Joined
- Dec 24, 2004
- Messages
- 5,063
- Helped
- 1,376
- Reputation
- 2,748
- Reaction score
- 1,061
- Trophy points
- 1,393
- Location
- New England, USA
- Activity points
- 38,017
I looked closely at the housing, and it does not appear to be suspended stripline. It has a cover on one side, and the rest is hogged-out. So, it very well might be a cavity type machined filter. If it were SSS, I would expect the housing to be in two halves split at the connector center pin, which it is not.