Boost converter current enhancement

Status
Not open for further replies.
S

Safiya

Junior Member level 2
Joined
Oct 25, 2013
Messages
22
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Visit site
Activity points
0
I want to design a basic boost converter with high current (1A) and 5v output , with 1.6 v input. What parameters affect the output current and what should be the R and Cout?
fs=1Mhz, inductor, diode etc i have connected.
Can I increase the output current keeping the Vout=5v and RL=100 ohm,
Thanks
SAfiya :thinker:
 

One key factor is resistance in the input stage.

At supply of 1.6 V, your converter will need to draw upwards of 10A peak. This means total resistance cannot be more than 0.1 ohm.

If your output is 1A at 5V, then your load calculates to be 5 ohms.
 
Reactions: Safiya

    S

    Safiya

    Points: 2
    Helpful Answer Positive Rating
So, to increase output current is to reduce load or increase output voltage., if i want 1A at output with 100ohm load , i have to increase the ouput voltage by 100V.
 

Safiya said:
So, to increase output current is to reduce load or increase output voltage., if i want 1A at output with 100ohm load , i have to increase the ouput voltage by 100V.
Click to expand...

Correct, increase it to 100V.
 
Reactions: Safiya

    S

    Safiya

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…