Bobbin depth of PQ3220 former?

Status
Not open for further replies.
T

treez

Guest
Do you agree that the “bobbin depth” (the space into which layers of windings can be fitted) for the Ferroxcube PQ3220 core is 5.4mm?
{ [26.7mm-15.9mm]/2 = 5.4mm }

Ferroxcube PQ3220 datasheet:
**broken link removed**
 

Well your interpretation is correct
Bobbin depth (the depth into which all layers of windings can be fitted) or winding height = 26.7mm-15.9mm]/2 = 5.4mm

Bobbin width (the length into which one layers of windings can be fitted) or winding width = 8.9mm
 
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…