Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

BlueNRG-Based PCB Design

Status
Not open for further replies.
M

moataz fouad

Member level 1
Member level 1
Joined
Sep 25, 2007
Messages
36
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Location
Egypt
Activity points
1,489
Hello,

Just designed and manufactered my BlueNRG-based PCB on ******, see attached picture for a 2-layer PCB with a PCB antenna works at 2.4GHz.

PCB specs:
Length : 55 mm Width : 30 mm Quantity : 10
Layers : 2 layers Thickness : 1.6 mm Surface Finish : HASL with lead
Finished Copper : 1 oz Cu Solder Mask : Green Silkscreen : White
CreateTime : 7/18/2016 5:25:53 AM Build Time : 2-3 days

Schematic used components:
MCU: PIC18F25K20T-I/SS
Bluetooth chip: BLUENRGQTR

See attached PCB photo.

BlueNRG.jpg
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top