Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Blaupunkt TV remote control

Status
Not open for further replies.

wpm

Member level 2
Member level 2
Joined
Dec 12, 2002
Messages
45
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Activity points
231
I have two TV remote control systems: RC113 and 807156.
Which code do these infra-red remote controls systems send?
I know there are several popular systems such as NEC, RC5, RC6 and RECS80. But which systems does Blaupunkt use?

Thanks.

Wim
 

Don't know but I guess it is RC5 or RC5 on another carrier frequency. If you can open the RCU you might guess what code it is using by looking at the chip. If it is a philips chip like SAA it is most likely RC5 or RC5 on another frequency.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top