rinaishlene
Junior Member level 3
- Joined
- Nov 29, 2005
- Messages
- 28
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,491
biquad filter simulator
Hi,
I'm working on a class project designing a low pass biquad filter with gain 2 and cut off frequency of 1kHz that follows the 3dB Chebyschev characteristics.From the simulation using PSpice,the circuit that we designed worked perfectly...but when we installed all the components on the breadboard and run the test using function generator and oscilloscope.,the circuit didn't function well.We input the sine wave form but the output was distorted.(not perfect sine wave)
I'm not sure what will be the actual output of this filter.
An if the output is distorted,when we try to obtain the gain by Vo/Vi,we didn't get the characteristics frequency response.
Please help to let us understand better.
Thanks
Rina
Hi,
I'm working on a class project designing a low pass biquad filter with gain 2 and cut off frequency of 1kHz that follows the 3dB Chebyschev characteristics.From the simulation using PSpice,the circuit that we designed worked perfectly...but when we installed all the components on the breadboard and run the test using function generator and oscilloscope.,the circuit didn't function well.We input the sine wave form but the output was distorted.(not perfect sine wave)
I'm not sure what will be the actual output of this filter.
An if the output is distorted,when we try to obtain the gain by Vo/Vi,we didn't get the characteristics frequency response.
Please help to let us understand better.
Thanks
Rina