Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bidirectional amplifier

Status
Not open for further replies.
K

kyawmyatthu

Newbie level 4
Newbie level 4
Joined
Sep 7, 2006
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,314
Pls,

I want to design two-port amp.

Tx of 1mW at port 1 is amplified to 1 W at port 2 (Rx).
Rx is supplied at port 2 and amplified to 40dB at port 1 with less noise.
Freq 1.8 to 2 GHz
Ref Impedance 50 ohm
Supply Volt 3 V.

I need reference to design above specification.

Pls advice .
Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top