nannapaneni
Junior Member level 3
- Joined
- Feb 25, 2011
- Messages
- 30
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,480
I am designing self biasing current source, I need to provide extra pin bias_ok such that Bias_OK should go if HIGH the final current is in the range of +/-10 of its final value. Can someone pls share idea how to add this pin.
My current is settling in 200us with some ringing and startup is off within 20us.
I am adding schematic for reference.
My current is settling in 200us with some ringing and startup is off within 20us.
I am adding schematic for reference.