Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

BFP520 Spice model import problem in @DS

Status
Not open for further replies.
boy

boy

Advanced Member level 1
Advanced Member level 1
Joined
Sep 30, 2002
Messages
481
Helped
98
Reputation
196
Reaction score
58
Trophy points
1,308
Location
Thailand
Activity points
3,963
I have a problem when I try to import the Spice model provided by infineon ( I have download it from infineon web site). The S-parameter is not the same as in the data sheet when I run s-parameter simulation in @DS. I have also included the package parameters. The S-21 is only the value that is close to the data sheet but other S are wrong. Any sugestion or any exprience importing SPICE model to the @DS.
 

Have you checked the DC bias? Is it exactly the same in both cases?
 

Yes I have run the DC simulation and check Vce and Ic. it is the same as in the data sheet.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top