rrunmai
Newbie level 1
Hi,
We are developing a board with BF526, mainly chosen for its OTG controller. We connected a usb hub(tpusb2046) to provide ports say for a camera and a light. But we expect only one device communicating at a time.
The hardware manual says, in host mode, hub is not supported. Can we use the hub with the restriction of only one device is talking to the DSP otg controller?
-Unmai.
We are developing a board with BF526, mainly chosen for its OTG controller. We connected a usb hub(tpusb2046) to provide ports say for a camera and a light. But we expect only one device communicating at a time.
The hardware manual says, in host mode, hub is not supported. Can we use the hub with the restriction of only one device is talking to the DSP otg controller?
-Unmai.