Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

BF 526 USB OTG controller

Status
Not open for further replies.
R

rrunmai

Newbie level 1
Newbie level 1
Joined
Apr 7, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi,

We are developing a board with BF526, mainly chosen for its OTG controller. We connected a usb hub(tpusb2046) to provide ports say for a camera and a light. But we expect only one device communicating at a time.

The hardware manual says, in host mode, hub is not supported. Can we use the hub with the restriction of only one device is talking to the DSP otg controller?

-Unmai.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top