[SOLVED] Behavior of rail-to-rail op amp

Status
Not open for further replies.
U

uplifting_mind

Newbie level 6
Joined
May 7, 2013
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Slovakia
Visit site
Activity points
1,359
Hello, I need help with non-inverting amplifier.
Why amplifier on first image don´t work like one on second picture? Do rail-to-rail op amp need different design in contrast to classic LM358 on the second pic.?
Both amplifier is designed as voltage follower, but circuit with AD8032 don´t have unit gain.
Thank you.


 

Looks like it should work. Are you sure your model is right? BTW, you realize that you have a 10K in parallel with a 1K on the output, right?

- - - Updated - - -

Looks like it should work. Are you sure your model is right? BTW, you realize that you have a 10K in parallel with a 1K on the output, right?
 

I tried the spice model downloaded from Analog Devices and it seems it has problem when used in single-supply mode. If you try the same circuit supplied by the dual supply +/- 5V it should work.
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…