Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Battery Protection by NDS9435/Si4403

Status
Not open for further replies.
A

ashugtiwari

Full Member level 4
Full Member level 4
Joined
Dec 12, 2008
Messages
218
Helped
45
Reputation
90
Reaction score
44
Trophy points
1,308
Activity points
3,310
Battery Protection

Hi All,
Can this arrangement can protect load from reverse battery and can it work when battery connected normally as mensioned in figure.

Please help.
Thanks in Advance.

Ashutosh
 

Battery Protection

You can find it yourself. Just go through the datasheer of the given device. Cheers
 

Re: Battery Protection

Hi,
According to datasheet the Vgs(th) is less than 0V which is GND potential. According to charctaristic curve for 'Id' vs 'Vds' at given Vgs, the curve shows that more current paas through if Vgs is less than 0V and for 0V Vgs there is no curev which shows no corrent or may be I am not understanding the datasheet but it looks like the MOSFET need lower than GND potential to function in normal operating condition of load circuit.
Please help me for understanding whether this will work or not.

Ashutosh
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top