Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Battery power consumption meter/logger (6S LiPo up to 30A)

Status
Not open for further replies.

BMOE

Newbie level 2
Newbie level 2
Joined
Aug 16, 2017
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
19
Hi.
I'm looking for a module that can measure power drawn from a LiPo battery to be able to estimate how much power is left.
As the power draw from the circuit is very uneven, only measuring the voltage is not good enough.
The LiPo battery is a 6S (21,6V) and the maximum current drawn will be 30A.
Anyone knows of a module or circuit that can do this.
It would be great if it had some type of communication interface to be able read out the data.

Thanks
/M
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top