Audioguru
Advanced Member level 7
- Joined
- Jan 19, 2008
- Messages
- 9,461
- Helped
- 2,152
- Reputation
- 4,304
- Reaction score
- 2,011
- Trophy points
- 1,393
- Location
- Toronto area of Canada
- Activity points
- 59,764
The three circuits in the middle with bass, mid and treble controls that use an opamp and the circuit from Red Circuits are good tone control circuits.
The circuits without the opamp are no good.
The circuits boost or cut bass, mid and treble sounds. They have enough maximum boost to overdrive most amplifiers.
No change, you can use the same circuits.
You were talking about a 4558 dual opamp before. It can be used in the tone controls circuit.hmm well then let me proceed with that first . . actually i didn't get any proper circuit diagram for 4458 audio amp so a lil.bit afraid of any malfunction
You were talking about a 4558 dual opamp before. It can be used in the tone controls circuit.
Oh, oh. "We have to design here" sounds like homework in school for a few people.
What is "a less power driving unit"? A golf cart?
word saladhmm too actually we have to design means for the proper execution of aim we have to go that way
My wife makes a yummy salad with many ingredients like that.word salad
My wife makes a yummy salad with many ingredients like that.word salad
My wife makes a yummy salad with many ingredients like that.
- - - Updated - - -
My wife makes a yummy salad with many ingredients like that.
There is an Engrish website in Greece where some members say, "execution of aim" which might mean "making plans".
We have been talking about tone controls. What will you use for a stereo power amplifier? How much power? How big is the battery?
word salad
Not exactly. Poor English is normal on this forum. However the chunk of text I quoted is completely meaningless no matter how you parse it."Word Salad" means that your English is poor. I don't know why you ..... never mind.
Not exactly. Poor English is normal on this forum. However the chunk of text I quoted is completely meaningless no matter how you parse it.
With a 6V battery then the output power into an 8 ohm speaker or 16 ohm earphones is low. Simple arithmetic shows that the maximum output power will be about 0.2W per channel (as shown on a graph in the datasheet for the LM386 power amplifier IC) and a stereo amplifier will use total power from the battery of 0.8W. Then the maximum current for the stereo power amplifier is 0.8W/6V= 133mA. The battery current for the preamp will be about 5mA so the total maximum current from the battery will be only 138mA, not 1000mA and not 2000mA. Music or speech is not played at full blast continuously so the average current from the battery will be maybe 28mA.
"Word Salad" means that your English is poor. I don't know why you ..... never mind.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?