Basics for Embedded learners

[ashish sharma]

hI GUYS I AM JUST STARTING TO LEARN EMBEDDED AND WOULD COMPLETE AT LEAST TO SOME RESPECT WITHIN SIX MONTHS

SO THE FLEDGELINGS AND THE GEEKS DO LOOK DOWN AT THE PROGRESS OF THIS TOPIC . FLEDGELINGS LIKE ME FOR THE GUIDANCE AND PROS FOR PROVIDING THE SAME .

YOUR COMMENTS AND ADVICE WOULD HELP ME AND MY ALIKES VERY MUCH!

 

[jshroff]

Re: LETS START EMBEDDED!

Tone down on the use of all caps, it's not polite to shout.

 

[hock]

Re: LETS START EMBEDDED!

what help you need?
hock

 

[ashish sharma]

Re: LETS START EMBEDDED!

thanks for giving the post a due consideration hock!
Now what i meant was that i am going on with embedded systems and i want the best bite. i have started 8051 and want to study from the best material available .Ps suggest the best one or if some good links that carry info about the same. and ps also about a good project i could carry along with this microcontrolller.

write now i am studying 8051 from k.j. ayala.

need worthy suggestions and advice.

 

[asit]

LETS START EMBEDDED!

Start with AVR. Use BASCOM trial version and later graduate to WinAVR.

 

[Antharax]

Re: LETS START EMBEDDED!

why should you 'pollute' your mind with basic?
Just start with the real stuff (C ;-) ). It ain't that difficult and you learn much more and usefull stuff!
Imagecraft has a good AVR Compiler with free trial. There are good 8051 Compilers available too. I recall that ther is one free IDE for 8051.

Antharax

 

[coshkun]

Re: LETS START EMBEDDED!

Basics are essential i think.After learning Assembly we can contiue with c or others.We can get stuck later if we don't know it.

 

[nzahirov]

Re: LETS START EMBEDDED!

It's also handy to learn a little bit of compiler construction after studying assembly to aid in debugging C programs.