Basic query of reset in 8051 uC

Monu johar · Jul 24, 2013

I am using 8051...and burn a programm in it as :-

Code ASM - [expand]
1
2
3
4
5
6
7
8
9
10
11
12
org 000h
mov tmod,#20h
mov scon,#50h
mov th1,#-3
setb tr1
clr ri
here: jnb ri,here
clr ri
mov a,sbuf
mov p2,a
sjmp here
end

now my query is that if i reset microcontroller from 9th pin..after burning the program...then all ports become input ports...if value in sbuf is 00110101. That should be present on port2 ,as by the code.. Here the port 2 is acting like output port..but on reset it is input port..now i want to know that will the data bits of sbuf come on port pins or not?

saurabhbadenkal · Aug 5, 2013

are you getting the data without resetting it?? if not then do mov a,sbuf before clearing ri

KerimF · Aug 5, 2013

For 8051, unlike PIC, the I/O pin is input as long it is 1 (due to its open collector output). Also it acts anytime as an output pin if it is set by the program as 1 or 0.

Notes:

(1) While a pin is set as 0, the pin cannot be used as an input terminal.
(2) Usually when a pin is needed as an output terminal, an external pull-up resistor may be added for its 1 state since its internal pull-up (if it exists) is rather of a high resistance.

Basic query of reset in 8051 uC

Monu johar

Newbie level 5

saurabhbadenkal

Newbie level 2

KerimF

Advanced Member level 5

Similar threads

Code ASM - [expand]
1 2 3 4 5 6 7 8 9 10 11 12	org 000h mov tmod,#20h mov scon,#50h mov th1,#-3 setb tr1 clr ri here: jnb ri,here clr ri mov a,sbuf mov p2,a sjmp here end

Basic query of reset in 8051 uC

Monu johar

Newbie level 5

saurabhbadenkal

Newbie level 2

KerimF

Advanced Member level 5

Similar threads

Privacy & Transparency

Privacy & Transparency