Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Basic Multimeter purchase

Status
Not open for further replies.

manishanand14

Full Member level 4
Full Member level 4
Joined
Sep 3, 2011
Messages
203
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,308
Location
Bangalore ,India
Activity points
2,572
Hello Guys

Please suggest me a basic multimeter from FLUKE.
Is Fluke 17B Digital Multimeter ok
Is it not a true RMS multimeter.

Some multimeters are true RMS while others are not.


Whenever we measure AC in a multimeter.Is is not an RMS value?Then what's the difference exactly?
 

The 17B isn't true RMS. It measures the average AC voltage then assumes it was really a sine wave and corrects the answer. That's fine if the signal was a sine wave (it usually is, otherwise you would be using an oscilloscope). If the original signal was a square wave then the value measured will be incorrect.

Keith
 
For less than $130 if you shop around you can get a Fluke 117. I really like this meter for the price and have them on my factory floor.
Fluke advertises it as a True RMS meter and they write "True-RMS for accurate measurements on non-linear loads"
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top