Sep 11, 2007 #1 segmex Advanced Member level 4 Joined Oct 25, 2006 Messages 114 Helped 7 Reputation 14 Reaction score 6 Trophy points 1,298 Activity points 1,830 proteus bascom hi i have problem with simulating lcd commands (in 4 bit mode) in proteus .. my code is written in bascom avr 1.11.8.3 FULL the problem is : proteus can not simulate line 9 to 16 in row 1 ,2 in 16×2 lcd Can any one upload me an example (sourse +proteus file ) Thanks in Advance Added after 5 hours: THIS is code and proteus file ... what is the problem u think !
proteus bascom hi i have problem with simulating lcd commands (in 4 bit mode) in proteus .. my code is written in bascom avr 1.11.8.3 FULL the problem is : proteus can not simulate line 9 to 16 in row 1 ,2 in 16×2 lcd Can any one upload me an example (sourse +proteus file ) Thanks in Advance Added after 5 hours: THIS is code and proteus file ... what is the problem u think !
Oct 1, 2007 #2 Medtronic Full Member level 5 Joined May 19, 2005 Messages 246 Helped 29 Reputation 58 Reaction score 16 Trophy points 1,318 Location Egypt Activity points 2,701 lm016l with bascom-8051 Hi My Frind don't forget that lm020l is a 16*1 lcd you replace it with lm016l which is 16*2 lcd and don't forget to config lcd=16*2 thants i hope it will help MedTronic
lm016l with bascom-8051 Hi My Frind don't forget that lm020l is a 16*1 lcd you replace it with lm016l which is 16*2 lcd and don't forget to config lcd=16*2 thants i hope it will help MedTronic
Oct 1, 2007 #3 segmex Advanced Member level 4 Joined Oct 25, 2006 Messages 114 Helped 7 Reputation 14 Reaction score 6 Trophy points 1,298 Activity points 1,830 bascom avr proteus thanks . the problem solved. i pressed help.