subhash_chevella
Member level 3
- Joined
- Sep 19, 2011
- Messages
- 61
- Helped
- 15
- Reputation
- 30
- Reaction score
- 15
- Trophy points
- 1,288
- Location
- Bangalore
- Activity points
- 1,698
Hi all,
I designed bandgap reference with the following specifications.
Supply 1.2V
Ref voltage 600mV
Power consumption <10uA
temp coefficient <50ppm/C
Design is completed and met above mentioned specifications.
Now I am doing stability analysis. For this I chose .tran analysis with supply rise time as 1u. I am getting oscillations.
Can any one pl guide me, how to compensate the band-gap reference? How should I proceed for the same.
Implemented achitecture: A CMOS Bandgap Reference Circuit with sub 1-V Operation by Hironori Banda, May 1999.
It would be very helpful, If you could share some information/papers/docs in this.
thank you.
regards,
Subhash C
I designed bandgap reference with the following specifications.
Supply 1.2V
Ref voltage 600mV
Power consumption <10uA
temp coefficient <50ppm/C
Design is completed and met above mentioned specifications.
Now I am doing stability analysis. For this I chose .tran analysis with supply rise time as 1u. I am getting oscillations.
Can any one pl guide me, how to compensate the band-gap reference? How should I proceed for the same.
Implemented achitecture: A CMOS Bandgap Reference Circuit with sub 1-V Operation by Hironori Banda, May 1999.
It would be very helpful, If you could share some information/papers/docs in this.
thank you.
regards,
Subhash C