Band pass filter design in HFSS

Status
Not open for further replies.
R

Ram_sek

Newbie level 3
Joined
Feb 22, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
22
Hi friends,

I have designed 3 rd order band pass filter in HFSS. For short circuit stubs, i used a small cylinderical hole in HFSS with radius as 0.4mm. Is there any standard formula or dimension ?

Please guide me
 

By "hole" do you mean a via between your signal trace and ground? If yes, the main requirements are that the hole/pad diameter is less than lambda/4 of your design frequency. This hole condition is required for it to not radiate (losses) and the length of the via should be less than lambda/4 in order to avoid an impedance transformation at the short circuit point or radiation losses.

Hope this helps
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…