Balanced audio signal with OpAmps

Status
Not open for further replies.
Z

Zedman

Full Member level 6
Joined
Oct 13, 2003
Messages
331
Helped
9
Reputation
18
Reaction score
6
Trophy points
1,298
Location
Hungary
Activity points
3,511
I would like to get balanced audio signal from
unbalanced and transmit it with UTP cable's
twisted pairs over 60-100 meters.
I can't get balun transformers here in the stores,
or if they have, it's in the price of gold...

I found these schematics with OpAmps, and would
like to know if they work? Will they work with
single supply OpAmps (LM358 for example)?

thanks in advance,
Zed
 

It should work.
I would use a simpler differential amp at the receiving end.
I would also use dual voltage power supply to simplify the design.
 

As I know LM358 is has internal biasing, will it need
more external parts?
Can you please show me the simplier design you
mentoined for the receiver?

thanks,
Zed
 

Thanks FoxyRick,

but i need to go cheap, because I have to put it
in 60 to 100 clients, and the opamp version seems
8 times cheaper according to the stores here :roll:
But the INA2137 seems to be a good solution for
the receiver side (there will be just 1 receiver).

any other ideas?

thanks in advance,
Zed
 

Hi,

SSM2142 driver from Analog Devices is a complete solution. Check also:
**broken link removed**.

Regards,
Aslsk
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…