Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Back to Basics - How to design a PWM controller

Status
Not open for further replies.
g.s.javed

g.s.javed

Member level 1
Member level 1
Joined
Oct 10, 2008
Messages
37
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Bangalore
Activity points
1,539
The reason I wanted to start afresh was that I was missing out on a lot of basic ideas to design a PWM controller.

Aim: Class D amplifier Design

Disturbing thoughts :

1. How to know the optimum frequency of operation for the PWM.
2. How to finalize the specs for the Amplifier, Comparator and Error Amplifier.
3. Power output is around 10W. how to reduce it to <1W.
4. Current Biasing for the PWM.
5. Active low pass filter design.

Could you please help me out. Just point to the links in the forum which have already been discussed or any addresses elsewhere.

Thank you
Javed
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top