[b]Programmer for KeeloQ devices[/b]

Status
Not open for further replies.
R

Remo

Newbie level 4
Joined
Mar 30, 2001
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
62
Hi ,
I'm looking for cheap device wich can program Hcs300 and hcs512 chips (KEELOQ by Microchip)
Thanks a lot for any help.
 

Your choice is Elnec Seeprog Programmer. You can find schematic and pcb in filemanager.

Best Regards.
 
Thanks for help. Seeprog can service only HCS3xx but Your answer is very helpful for me. Haven't You schematic because file manager is working?
Best wishes, remek.
 

Hi Remo,
You can use an evolution kit from Microchip-There is schematic and firmware in
h**p://www.microchip.com/1010/pline/tools/tech/index.htm
Best,
 

Highlander said:
Hi Remo,
You can use an evolution kit from Microchip-There is schematic and firmware in
h**p://www.microchip.com/1010/pline/tools/tech/index.htm
Best,
Click to expand...
Yes, but for both of evaluation kit's programmed Pic is needed.
I think best resolve is Microchip's PicProgV3, but I can't find schematic, original is too expensive for me. Anyway thanks for help.
Best Regards, Remek. :wink:
 

Hi,Remo.
If you have any programmator for PIC17 you can find firmware on Microchip CD or web site.
Regards
 

dima57 said:
Hi,Remo.
If you have any programmator for PIC17 you can find firmware on Microchip CD or web site.
Regards
Click to expand...
Could You write me a link to this firmwar?
Thanks, Remo.
 

Hi Remo,
After instalation of Evaluation kit softw. you will find on HCS_Eval dir file named Evfmwr24.hex - its your frmw.
Best,
 

Highlander said:
Hi Remo,
After instalation of Evaluation kit softw. you will find on HCS_Eval dir file named Evfmwr24.hex - its your frmw.
Best,
Click to expand...
Is this soft which should be put to PIC17xx of KeeloQ Evaluation Board right?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…