Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

AVR miniICE JTAG cable, help me !

Status
Not open for further replies.
kamejoko80

kamejoko80

Member level 3
Member level 3
Joined
Apr 7, 2004
Messages
55
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Location
VietNam
Activity points
418
Hi all, I've found the schematic of the AVR miniICE from www.mcu.cz web page
I flollow the guide of this document step by step, but I have a problem when Downloading the upgrade.ebn file from AVRStudio 4 to the ATMEGA16 (I don't have the TMEGA16L, so I use ATMEGA16 and the VCC is 5V) the message box appeared "Address :0x0000, Expected :0x940C, Recieved 0xFFFF".
When I turn on the AVRProg tool (from AVRstudio 4) the "Device list box" is inactived, always ATMEGA163, I can't chose the ATMEGA16. (I'm using WinXP)
who has done with this cable, please help me ???
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top