kamejoko80
Member level 3
Hi all, I've found the schematic of the AVR miniICE from www.mcu.cz web page
I flollow the guide of this document step by step, but I have a problem when Downloading the upgrade.ebn file from AVRStudio 4 to the ATMEGA16 (I don't have the TMEGA16L, so I use ATMEGA16 and the VCC is 5V) the message box appeared "Address :0x0000, Expected :0x940C, Recieved 0xFFFF".
When I turn on the AVRProg tool (from AVRstudio 4) the "Device list box" is inactived, always ATMEGA163, I can't chose the ATMEGA16. (I'm using WinXP)
who has done with this cable, please help me ???
I flollow the guide of this document step by step, but I have a problem when Downloading the upgrade.ebn file from AVRStudio 4 to the ATMEGA16 (I don't have the TMEGA16L, so I use ATMEGA16 and the VCC is 5V) the message box appeared "Address :0x0000, Expected :0x940C, Recieved 0xFFFF".
When I turn on the AVRProg tool (from AVRstudio 4) the "Device list box" is inactived, always ATMEGA163, I can't chose the ATMEGA16. (I'm using WinXP)
who has done with this cable, please help me ???
