Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] attenuation & damping rate

Status
Not open for further replies.
G

ghasem_008

Full Member level 4
Full Member level 4
Joined
Feb 9, 2012
Messages
221
Helped
11
Reputation
22
Reaction score
10
Trophy points
1,298
Activity points
2,990
hi to all,
i have a question.
i know that: "alpha" is "attenuation constant" and "exp(-alpha*z)" is "attenuation coefficient".
but what is mean "damping rate" term in electromagnetic surface waves?and what is it's relation with "alpha"?
thanks.
 

I thought you should give some substantial information about the system.You have to restrict yourself to general considerations.Later give me few time can check,if the unwanted signal is still observed when replacing the "transducer" with an equivalent Alpha relation.......
 

Later give me few time can check,if the unwanted signal is still observed when replacing the "transducer" with an equivalent Alpha relation.......



**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top