ATMEGA128 programming problem

Status
Not open for further replies.
A

awaisaamir

Newbie level 6
Joined
Nov 14, 2012
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Rawalpindi, Pakistan
Visit site
Activity points
1,357
hy

i recently start working with ATmega128 , i program it but i cant get output but in proteus it show output. i use avr studio 6

i post code here

Code: 
#include <avr/io.h>

int main(void)
{
	
	DDRD=0xFF;
    while(1)
    {
        //TODO:: Please write your application code 
		PORTD=0xF0;
    }
}


thanks.
 
Last edited by a moderator:

I don't see anything wrong with the code, it sets PORTD as output ad then sets bits 7-6-5-4 to high.

What does proteus simulation show?
Have you loaded the hex/elf file correctly to the proteus mcu model?

EDIT: ok, you actually said hardware problem so I have no idea what can be wrong in order to make this not work.
If it was a clock problem you wouldn't be able to program the device.
 

yes i connected all supply , controller is on but only JTAG pins are on HIGH state

- - - Updated - - -

this code is ok ??

- - - Updated - - -

what fuse setting should be for this code i am using 12 MHZ crystal oscillator
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…