Asus G41 Motherboard problem

Status
Not open for further replies.
P

peter_england

Full Member level 4
Joined
Jul 24, 2012
Messages
199
Helped
11
Reputation
22
Reaction score
11
Trophy points
1,298
Visit site
Activity points
2,478
the motherboard is powering on but no display also i checked that 3.3v from PSU is showing 2.8v and there is one IC GR8313 for PG signal generation that ic pin 8 is PG out and no voltage at that pin , also i checked with PCI post card and it is showing 0000 code and Reset LED is steady and no clock and reset signal present. please help.
 

Check the power supply if you are sure that the power supply is OK than measure the resistance from 3.3v to ground some thing is probably shorted.
 

peter_england said:
Ok but how to find a shorted component Between number of components?
Click to expand...

You can externally supply low voltage with high current, the component that sinks all the current will get hot, so touch them individually to find which one is really hot and that is the one most likely faulty. Unplug the computers ac power source before you do this and take every precautions while you do this.
 

Hi thanks for reply ,, The 3.3v rail from smps is showing 2.8 or 2.9volts and is i remove a Jumper near NB it shows me 3.3v this way I figured the short of NB. if I am wrong then please help me to troubleshoot further, thanks "Kamal".
iamkamalrandhawa said:
are you sure its north bridge shorted. how you found it?
Click to expand...

- - - Updated - - -

Hi thanks for reply ,, The 3.3v rail from smps is showing 2.8 or 2.9volts and if i remove a Jumper near NB it shows me 3.3v this way I figured the short of NB. if I am wrong then please help me to troubleshoot further, thanks "Kamal".
iamkamalrandhawa said:
are you sure its north bridge shorted. how you found it?
Click to expand...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…