[SOLVED] ASTEC Power Supply model#: AA20040 (blown).

Status
Not open for further replies.
R

RHeTTRoNiCS

Advanced Member level 4
Joined
Apr 2, 2013
Messages
108
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Visit site
Activity points
2,001
Hello Guys...need your advice...I got astec power supply model AA20040. It was accidentally plug-in to 220Vac (setting is 115Vac). Fuse blown and a power mosfet. However, after i replaced those blown parts and pump-in 115Vac, the fuse keep blowing. So decided to switch input to 220Vac and ofcourse pump-in 220. Result was the fuse not blown but the power supply still no output and cooling fan not spipping...Need your help....thanks a lot.
 

When you pumped 220V into it, was the 5VSB working properly but it just wasn't powering on?

You said a power MOSFET blew, so I'm assuming the PSU is a single forward topology, if it's double forward, check both FETs.

It also doesn't hurt to check the bridge rectifier and the input filtering capacitors.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…