danagnos
Newbie level 2
Greetings everyone,
Since I couldn't find a similar topic I decided to post my problem :
I am using Faraday Mem Maker along with UMC90 technology for SRAM generation.
In general, I want to use the .gds and .siz (net list) files from the me maker tool to perform some post-layout simulations with Hspice.
The flow utilises cadence 5 and Assura 4.1. The problem is that after the (successful) LVS of a cell-array block and its net list, the QRC tool exits with an error ( I have attached the report).
The warnings in the report always appear, even for cells that are extracted normally after creating a schematic by hand.
The funny thing is that UMC90nm doesn't have the transistors the are "missing" (P_L116_SPHVT etc) but others, named as P_10_SPHVT or similar.
I tried changing name and checking the .lib and .mdl files of the PDK as well as the files the seem to be problematic but couldn't find a solution, so if anyone has dealt with something similar in the past or has any kind of info, I would be grateful.
Thanks!
Since I couldn't find a similar topic I decided to post my problem :
I am using Faraday Mem Maker along with UMC90 technology for SRAM generation.
In general, I want to use the .gds and .siz (net list) files from the me maker tool to perform some post-layout simulations with Hspice.
The flow utilises cadence 5 and Assura 4.1. The problem is that after the (successful) LVS of a cell-array block and its net list, the QRC tool exits with an error ( I have attached the report).
The warnings in the report always appear, even for cells that are extracted normally after creating a schematic by hand.
The funny thing is that UMC90nm doesn't have the transistors the are "missing" (P_L116_SPHVT etc) but others, named as P_10_SPHVT or similar.
I tried changing name and checking the .lib and .mdl files of the PDK as well as the files the seem to be problematic but couldn't find a solution, so if anyone has dealt with something similar in the past or has any kind of info, I would be grateful.
Thanks!