beandpp
Newbie level 1
- Joined
- Aug 25, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 6
Hello!
I'm working on a project: There is a titanium bar in the salt water, and an E field along the bar with 100 V/m at 64 MHz. It should be a wave guide. I set up the model and assigned the material, but I don't know how to assign the E field and plot it. Attached is my hfss doc. Could anyone help me on this or teach me how to assign the field? Thank you!!!
I'm working on a project: There is a titanium bar in the salt water, and an E field along the bar with 100 V/m at 64 MHz. It should be a wave guide. I set up the model and assigned the material, but I don't know how to assign the E field and plot it. Attached is my hfss doc. Could anyone help me on this or teach me how to assign the field? Thank you!!!