asking about HMC769 regidter files.

Hi everybody,

I want to control VCO-PLL (HMC769) with my board by using atmega32A. However, I have some problems.

1. My HMC769 always runs in 8.4 GHz or 10.0 GHz, even I use 2 register maps from hittite.(HMC769_register_fraction.txt, HMC769_register_integer.txt). Anybody can tell me these files are correct? If not please send me these files.

2. How can I count Nint and Nfrac (Fvco = 9.3GHz, fxtal = 48MHz)?

Thank you very much.

PS: HMC769_register_fraction.txt
REVISION 3.1.7.0
REG 0 97370
REG 1 2
REG 2 1
REG 3 30
REG 4 28F5C
REG 5 DEADBE
REG 6 3FDE
REG 7 104845
REG 8 36FFF
REG 9 3F7FFF
REG A 1
REG B 1E071
REG C 1F
REG D 0
REG E 0
REG F 1
REG 11 0
REG 12 3
REG 13 1259
REG 14 0
REG 15 0
REG 16 0
REG 17 0
REG 18 0
REG 19 0
REG 1A 0
REG 1B 0
REG 1C 0
REG 1D 0
REG 1E 0
REG 1F 0
REG 10 0
XTAL 50
DIVIDER_MANUAL_MODE 1
VCO_TO_SYNTH_DIV 4
VCO_TO_OUT_DIV 1


HMC769_register_integer.txt
REVISION 3.1.7.0
REG 0 97370
REG 1 2
REG 2 1
REG 3 30
REG 4 0
REG 5 1
REG 6 D53E
REG 7 85D
REG 8 36FFF
REG 9 1FFFFF
REG A 0
REG B 1E070
REG C 19
REG D 0
REG E 0
REG F 0
REG 11 0
REG 12 2
REG 13 1259
REG 14 7
REG 15 0
REG 16 0
REG 17 0
REG 18 0
REG 19 0
REG 1A 0
REG 1B 0
REG 1C 0
REG 1D 0
REG 1E 0
REG 1F 0
REG 10 0
XTAL 50
DIVIDER_MANUAL_MODE 1
VCO_TO_SYNTH_DIV 4
VCO_TO_OUT_DIV 1