Nasser750gx
Member level 1
- Joined
- Oct 29, 2008
- Messages
- 36
- Helped
- 6
- Reputation
- 12
- Reaction score
- 6
- Trophy points
- 1,288
- Location
- France
- Activity points
- 1,512
Hi Everyone,
I have more than 15 years of background in FPGA, MCU, RF, etc. But I don't have the slightest idea on how I could make an ASIC (which is starting to look more important everyday that goes by).
Could someone let me know where to start from, what tools are out there, how I can learn and how I can do a prototype? I know shuttle-runs and I have been in charge of 28nm and 65nm ASIC projects, but I never have been involved in the silicon design (the Layout, how it's done, etc).
All suggestions are appreciated.
Thanks
I have more than 15 years of background in FPGA, MCU, RF, etc. But I don't have the slightest idea on how I could make an ASIC (which is starting to look more important everyday that goes by).
Could someone let me know where to start from, what tools are out there, how I can learn and how I can do a prototype? I know shuttle-runs and I have been in charge of 28nm and 65nm ASIC projects, but I never have been involved in the silicon design (the Layout, how it's done, etc).
All suggestions are appreciated.
Thanks