dreamtale
Junior Member level 1
- Joined
- Oct 28, 2014
- Messages
- 19
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 127
hello everyone
I want to make an arduino shield with display, also I want to integrate more functions. But now I have no more good ideas. Here are some simple function I want to achieve.
First is the display, not the kind of big, ugly 1602 or 12864, it must be small, clear.
So I chose 0.96 inch OLED, it's small, clear, I think it is the most suitable arduino display. If someone can give me a better choice, I would consider it.
Second, the magnetometer is also included in the shield. I used HMC5883 as a magnetometer.I will display a compass on the OLED.
Third, I put the DS1307 on the shield as RTC.
Finally, I put HM06 Bluetooth on this board. SMD moudle.
I want to make an arduino shield with display, also I want to integrate more functions. But now I have no more good ideas. Here are some simple function I want to achieve.
First is the display, not the kind of big, ugly 1602 or 12864, it must be small, clear.
So I chose 0.96 inch OLED, it's small, clear, I think it is the most suitable arduino display. If someone can give me a better choice, I would consider it.
Second, the magnetometer is also included in the shield. I used HMC5883 as a magnetometer.I will display a compass on the OLED.
Third, I put the DS1307 on the shield as RTC.
Finally, I put HM06 Bluetooth on this board. SMD moudle.
Last edited: